Semiautomatic Screen Printer C-1000
Adoption of Japanese high-precision motor and linear orbit can improve steadiness of squeegee printing
The pressure of double-squeegee printing and the up/down motion of squeegee can be adjusted separately with printing head and throttle behind small air cylinder for fear of resonant vibrations
Total Input Power & Voltage: single-phase 220V 50/60Hz, and total power: 100W
The print head can be lifted up in inclination of 45° to facilitate installation and uninstallation of squeegee and cleaning of steel mesh
The print head can be moved along and fastened to make easier location of steel mesh and have a better printing effect
The mesh arms can be adjusted separately on the left and right, suitable for the printing range of 470 – 750mm
The combined printing table is designed with relaining key and positioned PIN, applicable to operation of single-sided base plate and two-sided base plate
In the plate-proofreading method, adoption of mesh arm with proofreading and adjustment of printed matter (bedplate) X, Y and Z makes proofreading easier and simpler
Adoption of computerized PLC empowered with human-computer interface brings you many options including single/double printing and manual/auto modes
The squeegee seat can be adjusted fore and aft, and squeegee blade can be adjusted in the inclination of ±15° as required in printing
Application of SMC pneumatic cylinder and magnetic proximity switch can make work table move to and fro and the precision of printing surface to ±0.01mm
Operation air pressure: 4-6kgf/cm²; print station area: 300*400mm and 450*450mm (fit for XL); printing precision: ±0.05mm; and repeat precision:±0.02mm
Configuration of auto numeration and alarm frequency setup facilitate output statistics
The printing dead time can be adjusted so as to meet production demand
|
Printing Area
|
300 x 400mm
|
||
|
Screen Frames
|
370 x 470mm 420 x 520mm 550 x 650mm
|
||
|
PCB Size
|
250 x 350mm
|
PCB Thickness
|
0.2 – 2.0mm
|
|
PCB Clamping
|
Outer or Pin
|
||
|
TalbeAdjustmentRanges
|
±10mm
|
||
|
Printing Precision
|
±0.05mm
|
||
|
Repeat Positioning Precision
|
±0.02mm
|
||
|
IC Pitch
|
0.3mm
|
||
|
Air Supply
|
4-6kgf/cm2
|
||
|
Power Supply
|
AC220V, 50/60Hz, 100W
|
||
|
Dimension
|
L650 x W860 x H1630mm
|
||
|
Weight
|
280kg
|
||
|
Squeegee Type
|
SUS316 t=0.3mm
|
||
|
Squeegee Angle
|
±15°
|
||
|
Left/Right Squeegee Range
|
Maximum 530mm adjustable
|
||
|
Distance between Squeegee
|
55mm(30-80mm adjustable)
|
||
|
Squeegee Speed
|
0-9000mm/min adjustable
|
||
|
Up/Down Squeegee Range
|
0-40mm adjustable
|
||
|
Up/down StencilRange
|
0-150mm adjustable
|
||
|
Cycle Time
|
5 – 20 seconds
|
||
|
Control Mode
|
touch screen panel + PLC
|
||
|
Floor Space of Printer
|
1m2
|
||